On Sale! Trilithic Seeker Lite 2 Leakage Detector Test Tool – AAATesters.com

Click for Product Info and Updated Pricing

Trilithic Seeker Lite 2 CATV Meters

SKU: 1S08

Trilithic Seeker Lite2 Leakage Detector Test Tool

The Seeker Lite² works by measuring ambient RF leakage in and around a subscriber’s premises and can be used to identify and locate all RF leaks greater than 10 µV/m

Includes Case For Unit & Accessories As Listed

Seeker-2 Seeker2

Trilithic Seeker Lite 2 Seeker-Lite 2 CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Trilithic Seeker Lite 2
The Seeker Lite²™ is a tough, convenient, and flexible leakage test tool. It assists in subscriber installations by verifying that the leakage within the house is not great enough to contribute to the cable system’s cumulative leakage index (CLI). Leaks can also be important indicators of ingress that can hinder communication on the return band. The Seeker Lite² can also be used to find leaks during troubleshooting.

The Seeker Lite² works by measuring ambient RF leakage in and around a subscriber’s premises and can be used to identify and locate all RF leaks greater than 10 µV/m.

Easy Frequency Configuration
Trilithic’s Seeker Setup™ software simplifies the process and makes configuring multiple units quicker and easier. Instead of returning your Seeker Lites to the factory to make hardware modifications, you can use Seeker Setup to adjust frequencies.

Trilithic Seeker Lite 2 CATV Meters

Multiple Frequency Presets
The Seeker Lite² can be set up to operate on as many as 10 different frequency presets, making it easier to monitor and maintain multiple cable systems. These presets define thel eakage monitoring frequency and, if
desired, the tag detection frequency as well. You have the option of setting up only one frequency preset for simple operation, or multiple leakage frequencies for maintaining multiple cable systems. Frequency settings range from 118.5 to 147.25 MHz and can be entered in .00625 MHz (6.25 kHz increments.

Superior Antenna
An improved antenna design provides more directionality than what is typically available from other leakage meters.

Channel Tag Compatibility
Compatibility with Trilithic’s CT-2™ and CT-3™ channel tag devices is another feature of the Seeker Lite. Channel tagging refers to the process of adding frequency tags to a broadcast channel signal. The Seeker Lite² can be set up to detect a tagged leak and to ignore leaks that are not tagged. This feature helps you avoid chasing false alarms from signals originating outside of your system.

GT Noise Discrimination
For systems employing digital set-top terminals that cannot tolerate “tagged” leakage carriers, the Seeker Lite² has enhanced “false alarm” resistance. The Seeker Lite² analyzes the detected RF energy and automatically rejects all noise and signals that are not caused by leaks from your system.

Squelch Operation
Squelch level is the RF signal threshold that the Seeker Lite² uses to determine the validity of a detected signal. The signal “breaks squelch” when the RF leakage is greater than the squelch level, as long as any enabled tag or GT noise qualifiers are met as well. The receiver will not alarm for signals below the squelch level. The squelch level has a factory default of 20 µV/m, however it can be reconfigured using Seeker Setup software.

Source localization
The Seeker Lite² emits an audible tone to help you pinpoint the leakage source. Point the Seeker Lite² in various directions and listen to the pitch of the tone being emitted. Move in the direction from where the pitch is the highest. The closer you move toward the leak, the higher-pitched the tone will become.

Seeker Lite 2

SEEKER LITE MODES
Measurement Mode
Measurement mode is used to accurately determine the strength of a leak, pinpoint its location, and provide a leakage value for documentation. Measured RF leakage values can range from 10 to 2000 µV/m and are displayed in large, easy-to-read numbers. A bar graph at the bottom of the display illuminates proportionally to the strength of the leak. Additionally, an audible tone will sound if the measured signal breaks squelch. The signal breaks squelch when the RF leakage is greater than the squelch level, as long as any enabled tag or GT noise discrimination qualifiers are also met. This tone can be used to help locate the leak source.

Cruise Mode
The LED on the top of the Seeker Lite² will slowly blink to show the meter is operating in cruse mode. In contrast to the continuous monitoring done during measurement mode, cruise mode monitoring is done in cycles. The Seeker Lite² “sleeps” for a short period of time, wakes up, then takes a measurement. An alarm will sound if the measured signal breaks squelch. If the technician wants to investigate the alarm, he switches the meter to measurement mode. Less battery power is used during cruise mode than measurement mode.

Features:
– Numerical Measurement Display
– Sensitive, Stable Measurements
– Directional Antenna that Helps Locate Leaks
– Multi-Channel Operation
– Long Battery Life

Specifications:

Frequency range 118.5 to 147.25 MHz
Settable using the Seeker Setup software, in 6.25 KHz steps
Default frequency settings:
121.2625 MHz
127.2625 MHz
133.2625 MHz
139.2500 MHz
146.2625 MHz
Frequency Setting range Up to 10 operating frequencies, selectable by tabbing
Selections loaded into detector using Seeker Setup software
level range 10 to 2000 µV/m
Can freeze current numeric reading
Numerical Display Readout of any detected leakage within the sensitivity range
Audible Tone Tone is present if leakage amplitude exceeds squelch setting
Pitch is proportional to strength of leak

Condition: Refurbished
Warranty: 90 Day Exchange

Included:
– Trilithic Seeker Lite2 Leakage Detector w/ AC Adapter & USB Cable (BC# 23114)
– User Manual On CD-ROM
– Case For Unit

Buy, Sell, New, Used, CATV Meters Seeker Lite 2

Trilithic Seeker Lite 2 Spec Sheet