AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! Trilithic Seeker Lite Leakage Detector Test Tool – AAATesters.com

On Sale! Trilithic Seeker Lite Leakage Detector Test Tool – AAATesters.com

Click for Product Info and Updated Pricing

Trilithic Seeker Lite CATV Meters

Trilithic Seeker Lite Leakage Detector Test Tool

Seeker Lite works by measuring ambient RF leakage in and around a subscriber’s premises and can be used to identify and locate all RF leaks greater than 10 µV/m

Inlcudes Carrying Case & Accessories As Listed

Trilithic Seeker Lite Leakage Detector
Seeker Lite is a tough, convenient and flexible tool used to perform leakage tests. It can assist in subscriber installs by verifying that leakage in the house is not great enough to contribute to the cable system’s Cumulative Leakage Index (CLI). It can also be used to find leaks during troubleshooting.

Seeker Lite works by measuring ambient RF leakage in and around a subscriber’s premises and can be used to identify and locate all RF leaks greater than 10 µV/m.

Trilithic Seeker Lite

Features:
Easy Frequency Configuration
-The Seeker Setup software simplifies the configuration process. Instead of going to the factory to make hardware modifications, you can use the Seeker Setup software to adjust frequencies.
Multiple Frequency Presets
-Your Seeker Lite can be setup to operate on up to 10 different frequency presets, which makes it easier to monitor and maintain multiple cable systems. These presets define the leakage monitoring frequency and, if desired, the tag detection frequency as well. You have the option of setting up only one frequency preset for simple operation, or multiple leakage frequencies for maintaining multiple cable systems. Frequency settings range from 118.50 MHz to 147.2500 MHz in 6.25 kHz increments (these increments are sufficient for use with HRC).
Superior Antenna
-An improved antenna design provides more directionality than typically available from other leakage meters.
Channel Tag Compatibility
-Compatibility with both the Trilithic CT-2 and CT-3 channel tag devices is another feature of your Seeker Lite. Channel Tag refers to the process of adding frequency tags to a broadcast channel signal. Your Seeker Lite can be setup to detect a tagged leak and to ignore leaks that are not tagged. With this feature, you are saved from chasing false alarms from signals that do not originate in your system. Channel Tag values range between 10 Hz and 23 Hz and are configured using the Seeker Setup software.
GT Noise Discrimination
-Your Seeker Lite works with systems employing digital set top terminals that cannot tolerate “tagged” leakage carriers. Therefore, enhanced “false alarm” resistance can be provided without the use of a tagged leakage signal. The Seeker Lite analyzes the detected RF energy and automatically rejects all noise and signals that are not caused by leaks from your system. GT noise discrimination is enabled/disabled using the Seeker Setup software.
Squelch Operation
-Squelch level is the RF signal threshold that the Seeker Lite uses to determine the validity of the signal. The signal “breaks squelch” when the RF leakage is greater than the squelch level, as long as any enabled tag or GT noise qualifiers are met as well. The receiver will not alarm for signals below the squelch level. The squelch level has a factory default of 20 µV/m. However, it can be reconfigured using the Seeker Setup software.
Source Localization
-The Seeker Lite emits an audible tone to help you pinpoint the leakage source. The tone frequency increases with signal strength. As you move closer to the leak, the tone frequency will increase.

Seeker Lite

Specifications:

Frequency Range: 118.50 to 147.25 MHz, settable using the Seeker Setup software
Frequency Presets: Up to ten selectable operating frequencies. Selections are loaded into the detector using the Seeker Setup software.
Level Range: 10 to 2000 µV/M. Can freeze current numeric reading or hold peak readings.
Numerical Display: LCD readout of any detected leakage within sensitivity range.
Audible Tone: Tone is present if leakage amplitude exceeds squelch setting. Pitch is proportional to strength of leak.
Channel Tag Range: 10 Hz to 23 Hz
Power: Built-in Lithium Ion Battery
Operation Time: Measurement Mode: 8 Hours Typical
Cruise Mode: 100 Hours Typical
Charge Time: Less than 3 hours for full-charge
Other: Dimensions: 162mm X 75mm X 40mm
Weight: 0.60 lbs (272g)

Condition: Refurbished
Warranty: 90 Day Exchange

Included:
– Trilithic Seeker Lite Leakage Detector (BC# 09524)
– AC Adapter/Charger w/ USB Cable
– RS232 PC Interface Cable
– User Manual On CD-ROM
– Carrying Case (G)

Buy, Sell, New, Used, CATV Meters Seeker Lite

 


Trilithic Seeker Lite Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List