On Sale! Trilithic XFTP House Detective Installation Kit – AAATesters.com
Click for Product Info and Updated Pricing
Trilithic XFTP CATV Meters
SKU: 1A97
Trilithic XFTP House Detective Installation Kit With:
Trilithic XFTP TR-2
Trilithic XFTP Seeker Lite
Trilithic XFTP TDR 2040
Everything You Need For Basic Installation, Validation, And Service Of Modern Cable Television Services.
Includes Hard Carrying Case & Accessories As Listed
TR2 TR 2 TDR2040 TDR-2040 CATV
Trilithic House Detective House-Detective Installation Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
Trilithic XFTP House Detective Installation Kit
Overview
The House Detective™ installation kits are a selection of instruments specifically designed to provide everything you need for basic installation, validation, and service of modern cable television services. This group of instruments was selected based on years of experience supplying test equipment to the cable industry, accompanied with a clear understanding of the tasks needed to certify a modern drop. The House Detective gives you everything you need for efficient cable installations at a very affordable price.
House Detective
This original House Detective installation kit includes the TR-2™ signal level meter, the Seeker Lite™ leakage detector, and the TDR-2040™ cable fault locator.
Trilithic XFTP
TR-2 signal level meter
The XFTP TR-2 is an economical solution ideal for your basic HFC installation needs. This simple to use meter provides fast and efficient measurements including; signal level measurement, tilt measurement to balance your system, carrier to-noise measurements, a voltmeter function, and it features an extended battery life. Weighing less than one pound, this simple to use, rugged meter has a durable plastic case and is convenient for one-hand operation.
TR-2 Specifications:
Frequency Range | Range: 46 to 864 MHz Steps: 50 kHz, 100 kHz, 1 MHz, 10 MHz, 100 MHz |
Level Measurement | Range: -30 to +60 dBmV Accuracy: ±2.0 dB @ 20° C ± 5° (@ 68° F ± 9°) Resolution: 0.5 dB |
Carrier-to-Noise Ratio | Range: 20 to 50 dB Input signal range: =25 dBmV Measure accuracy: ±2.5 dB Resolution: 0.5 dB |
Voltage | Input range: 1 to 100 V (AC/DC) Accuracy: ±2.0 V Resolution: 1.0 V |
Power | 3.6 V/2.1 Ah rechargeable NiMH battery. 6+ hours working time (without audio and LCD backlight). 10 to 12 hour charge time. |
Operational Temperature | -10° to +40° C (14° to 104° F) |
Display | Backlit LCD |
Audio | Built-in speaker (speaker is automatically powered on when meter is in single frequency mode). |
Weight | 0.85 lb (386 g) |
Dimensions (H x W x D) |
6.65” x 2.80” x 1.61” (169mm x 71mm x 41mm) |
Seeker Lite Leakage Detector
The Seeker Lite²™ is a tough, convenient and flexible leakage test tool. It assists in subscriber installs by verifying that leakage in the house is not great enough to contribute to the cable system’s cumulative leakage index (CLI). Leaks can also be important sources of ingress that can hinder communication on the return band. The Seeker Lite² can also be used to find leaks during troubleshooting. Seeker Lite² works by measuring ambient RF leakage in and around a subscriber’s premises and can be used to identify and locate all RF leaks greater than 10 µV/m.
Seeker Lite Specifications
Frequency Range | 118.50 to 147.25 MHz settable, using Seeker Setup configuration software. |
Default Frequencies | 121.2625 MHz 127.2625 MHz 133.2625 MHz 139.2500 MHz 146.2625 MHz |
Frequency Presets | Up to ten selectable operating frequencies. Selections are loaded into detector using Seeker Setup software. |
Level Range | 10 to 2000 µV/m. Can freeze current numeric reading or hold peak readings |
Display | LCD readout of any detected leakage within sensitivity range. |
Audible Tone | Tone is present if leakage amplitude exceeds squelch setting. Pitch is proportional to the strength of the leak. |
Channel Tag Range | 10 to 23 Hz |
Power | Internal Lithium-ion battery. |
Operation Time | Measurement mode: 8 hours typical. Cruise mode: 100 hours typical. Charge time: Less than 3 hours for full charge. |
Dimensions (H x W x D) |
6.38” x 2.95” x 1.57” (162mm x 75mm x 40mm) |
Weight | 0.60 lb (272 g) |
XFTP
TDR 2040 Cable Fault Locator
The TDR 2040 provides installation technicians and anyone involved in the installation or maintenance of metallic cables with the capability to quickly find faults in cables from a distance of 0 to 2500 feet. The evaluation is performed by simply selecting the appropriate cable type from a pre-stored library, attaching the cable connector (or attaching test leads to the two conductors of the cable), and pressing a single button to display the distance to the open or short. Voltage is continuously measured and displayed to warn the operator of a potentially dangerous condition. The TDR 2040 will also inject one of multiple tones into the cable for tracing cables in walls or ceilings, with any standard probe.
TDR 2040 Specifications:
Measurement Length | Minimum: 0’ or 0 m Maximum: 2500’ or 750 m Accuracy: ±2% plus ± 2’ (with correct NVP) Resolution: 1’ or 0.20 m |
Voltage | Range: 0 to 250 V (AC/DC) Accuracy: ±3.0% + 1 V |
Tracing Tone | Frequencies: 575 Hz, 977 Hz, 1.0 KHz, 7.82 KHz Patterns: 4 |
Power | 4 AA alkaline batteries |
Operational Temperature | 0° to 50° C (32° to 122° F) |
Storage Temperature | -10° to +55° C (14° to 131° F) |
Display | 122 x 32 backlit LCD |
Weight | 0.54 lb (247 g) (includes batteries) |
Dimensions (H x W x D) |
7.00” x 3.20” x 1.40” (178mm x 81mm x 36mm) |
Adapter Types | Banana jack to alligator test leads Banana jack to BNC adapter BNC to F-type adapter |
Condition: Refurbished
Warranty: 90 Day Exchange
Included:
– Trilithic XFTP TR-2 (BC# 09523) w/ AC Adapter
– Trilithic XFTP Seeker Lite (BC# 09524) w/ Universal AC Adapter & USB Cable
– Trilithic XFTP TDR 2040 (BC# 09525) w/ Hard Copy User Manual
– RS232 PC Interface Cable
– Coax Cable
– User Manual On CD-ROM
– Hard Carrying Case