AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! Trilithic XFTP House Detective Installation Kit – AAATesters.com

On Sale! Trilithic XFTP House Detective Installation Kit – AAATesters.com

Click for Product Info and Updated Pricing

Trilithic XFTP CATV Meters

Trilithic XFTP House Detective Installation Kit With:
Trilithic XFTP TR-2
Trilithic XFTP Seeker Lite
Trilithic XFTP TDR 2040

Everything You Need For Basic Installation, Validation, And Service Of Modern Cable Television Services.

Includes Hard Carrying Case & Accessories As Listed

TR2 TR 2 TDR2040 TDR-2040 CATV

Trilithic House Detective House-Detective Installation Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Trilithic XFTP House Detective Installation Kit
Overview
The House Detective™ installation kits are a selection of instruments specifically designed to provide everything you need for basic installation, validation, and service of modern cable television services. This group of instruments was selected based on years of experience supplying test equipment to the cable industry, accompanied with a clear understanding of the tasks needed to certify a modern drop. The House Detective gives you everything you need for efficient cable installations at a very affordable price.

House Detective
This original House Detective installation kit includes the TR-2™ signal level meter, the Seeker Lite™ leakage detector, and the TDR-2040™ cable fault locator.

TR-2 signal level meter
The XFTP TR-2 is an economical solution ideal for your basic HFC installation needs. This simple to use meter provides fast and efficient measurements including; signal level measurement, tilt measurement to balance your system, carrier to-noise measurements, a voltmeter function, and it features an extended battery life. Weighing less than one pound, this simple to use, rugged meter has a durable plastic case and is convenient for one-hand operation.

Trilithic XFTP

TR-2 Specifications

Frequency Range Range: 46 to 864 MHz
Steps: 50 kHz, 100 kHz, 1 MHz, 10 MHz, 100 MHz
Level Measurement Range: -30 to +60 dBmV
Accuracy: ±2.0 dB @ 20° C ± 5° (@ 68° F ± 9°)
Resolution: 0.5 dB
Carrier-to-Noise Ratio Range: 20 to 50 dB
Input signal range: =25 dBmV
Measure accuracy: ±2.5 dB
Resolution: 0.5 dB
Voltage Input range: 1 to 100 V (AC/DC)
Accuracy: ±2.0 V
Resolution: 1.0 V
Power 3.6 V/2.1 Ah rechargeable NiMH battery.
6+ hours working time (without audio and LCD backlight).
10 to 12 hour charge time.
Operational Temperature -10° to +40° C (14° to 104° F)
Display Backlit LCD
Audio Built-in speaker (speaker is automatically powered on when meter is in single frequency mode).
Weight 0.85 lb (386 g)
Dimensions
(H x W x D)
6.65” x 2.80” x 1.61”
(169mm x 71mm x 41mm)

Seeker Lite Leakage Detector
The Seeker Lite²™ is a tough, convenient and flexible leakage test tool. It assists in subscriber installs by verifying that leakage in the house is not great enough to contribute to the cable system’s cumulative leakage index (CLI). Leaks can also be important sources of ingress that can hinder communication on the return band. The Seeker Lite² can also be used to find leaks during troubleshooting. Seeker Lite² works by measuring ambient RF leakage in and around a subscriber’s premises and can be used to identify and locate all RF leaks greater than 10 µV/m.

Seeker Lite Specifications

Frequency Range 118.50 to 147.25 MHz settable, using Seeker Setup configuration software.
Default Frequencies 121.2625 MHz 127.2625 MHz
133.2625 MHz 139.2500 MHz
146.2625 MHz
Frequency Presets Up to ten selectable operating frequencies.
Selections are loaded into detector using Seeker Setup software.
Level Range 10 to 2000 µV/m.
Can freeze current numeric reading or hold peak readings
Display LCD readout of any detected leakage within sensitivity range.
Audible Tone Tone is present if leakage amplitude exceeds squelch setting.
Pitch is proportional to the strength of the leak.
Channel Tag Range 10 to 23 Hz
Power Internal Lithium-ion battery.
Operation Time Measurement mode: 8 hours typical.
Cruise mode: 100 hours typical.
Charge time: Less than 3 hours for full charge.
Dimensions
(H x W x D)
6.38” x 2.95” x 1.57”
(162mm x 75mm x 40mm)
Weight 0.60 lb (272 g)

TDR 2040 Cable Fault Locator
The TDR 2040 provides installation technicians and anyone involved in the installation or maintenance of metallic cables with the capability to quickly find faults in cables from a distance of 0 to 2500 feet. The evaluation is performed by simply selecting the appropriate cable type from a pre-stored library, attaching the cable connector (or attaching test leads to the two conductors of the cable), and pressing a single button to display the distance to the open or short. Voltage is continuously measured and displayed to warn the operator of a potentially dangerous condition. The TDR 2040 will also inject one of multiple tones into the cable for tracing cables in walls or ceilings, with any standard probe.

XFTP

TDR 2040 Specifications

Measurement Length Minimum: 0’ or 0 m
Maximum: 2500’ or 750 m
Accuracy: ±2% plus ± 2’ (with correct NVP)
Resolution: 1’ or 0.20 m
Voltage Range: 0 to 250 V (AC/DC)
Accuracy: ±3.0% + 1 V
Tracing Tone Frequencies: 575 Hz, 977 Hz, 1.0 KHz, 7.82 KHz
Patterns: 4
Power 4 AA alkaline batteries
Operational Temperature 0° to 50° C (32° to 122° F)
Storage Temperature -10° to +55° C (14° to 131° F)
Display 122 x 32 backlit LCD
Weight 0.54 lb (247 g) (includes batteries)
Dimensions
(H x W x D)
7.00” x 3.20” x 1.40”
(178mm x 81mm x 36mm)
Adapter Types Banana jack to alligator test leads
Banana jack to BNC adapter
BNC to F-type adapter

Condition: Refurbished
Warranty: 90 Day Exchange

Included:
– Trilithic XFTP TR-2 (BC# 09523) w/ AC Adapter
– Trilithic XFTP Seeker Lite (BC# 09524) w/ Universal AC Adapter & USB Cable
– Trilithic XFTP TDR 2040 (BC# 09525) w/ Hard Copy User Manual
– RS232 PC Interface Cable
– Coax Cable
– User Manual On CD-ROM
– Hard Carrying Case

Buy, Sell, New, Used, Trilithic XFTP


Trilithic XFTP Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List